Orbegozo SF 0244 Manual De Instrucciones página 11

SF 0246
ASSEMBLY INSTRUCTIONS
Assembly of stand:
1. Unscrew the nut of telescopic tuve and pull up inner tuve until desired height.
2. Tighten the nut of telescopic tube to fix position.
3. Place telescopic tube in the base and screw on bottom side of base the L shape screw.
4. The stand will be ready for using.
Assembly of blade and grill
1. Remove the nut from motor shaft.
2. Place rear grill in motor shaft and fit it with the nut.
3. Place the blade in motor shaft and before fit it with nut as above picture shows.
4. Place cover on front grill screwing its 3 screws. Put the outer ring on front grill and join
it with rear grill.
5. Fix the grills tightening the screw of outer ring.
6. Put the head of fan into the telescopic tube and tighten the screw of head to fix it.
OPERATING INSTRUCTIONS
Using the control panel and remote control
This fan is equipped with 3 speeds, timer and remote control. For your convenience, the
buttons on control panel and remote control are the same.
11