Steinberg Systems SBS-KW-1000/10G Manual De Instrucciones página 10

INDICATORS
Display Name Note
Stable lit when weight is stable
Zero lit when weight is at zero
Tared lit when scale is tared
Hold lit when scale is locked
lb lit when unit is lb
kg lit when unit is kg
UN lit when unit is User Unit
DISPLAY MESSAGES BY NORMAL USE
Message Stand for
-
SETUP
EN
BATtery
END
OFF
OVERload
ERRor
OPERATION
POWER ON/OFF
Press for 1s to power-on scale. Scale perform initialization and power-on test, "0.0.0.0.0" shows
twice, then capacity 1000 shows, battery life percentage bat99 shows, weight detection ----- shows and then
auto zero.
For information about Auto-Zero, refer to Scale Configuration.
Press for 1s to power-off scale. Battery life percentage bat90 shows, off message |off| shows, and then
cut off power.
REV. V 2016
Note
detect weight
user setup menu
battery life percentage
save and exit
power off
Overloading
invalid operation
18
Zero
Press , to zero. light on.
If load is in motion, or tared, or out of Manual-Zero Range, |err| shows.
For information about Manual-Zero Range, refer to Scale Configuration.
Tare IN/OUT
In gross mode, press , to tare in. light on.
If load is in motion, or negative, or out of Tare Range, |err| shows. Tare will re¬duce the apparent overload
range of scale. For example, if a 5000*2kg scale has a 1000kg container as its tare, the scale will overload at
a new weight of 4018kg (5000 – 1000 + additional 9 divisions).
In net mode, press , to tare out. light off.
LOCK/UNLOCK
Press , to lock screen. light on.
Press , to lock screen. light off.
UNIT SWITCH
Press , to switch unit in between kg, lb, and User Unit.
When unit is kg, is on. When unit is lb,
mation about User Unit, refer to Scale Configuration.
USER SETUP
The user setup enables you to fix several functions of the scale so that it better fits your expectations by
using it. The different parameter can be determined one after another.
Entering the user setup
Simultaneously press and , to enter user setup menu. SETUP shows.
AUTO-OFF TIMING
Press , to enter Auto-Off Timing. Off-- shows.
Press , to change timing value.
Auto-Off Timing can be set to: 0(disabled), 5(5min), 10(10min), 15(15min), 30(30min), 60(60min).
Auto-Off function maximizes scale's battery life against people's carelessness not to power off scale when it's
not working. Auto-Off starts countdown timer when there's no action or load is stable. Any key pressing or
motion in load restarts countdown timer.
REV. V 2016
is on. When unit is User unit, is on. For more infor-
19
EN