Product Profile; Assembly Procedures - EAS ELECTRIC EPUR660 Manual De Instrucciones

Product Profile

Notes
The pictures contained in the Manual are for reference
only, and please be subject to the physical product in the
packing box
Name of components
Gaseous pollutant senso
PM2.5 sensor
Air outlet grill
Operation panel
Handle Display
screen
HEPA filter
Pre-Filter
Air inlet grill
0 3
Air Window
Main machine
Protective bag
1 1 2
Manual
3 4
V.1
Assembly Instructions

Assembly procedures

1 2
Take down the air inlet grill Take out the Pre-Filter
Press the U-shaped buckle
to pull outward, and take out
the Pre-Filter
5 6
Assemble the HEPA filter Assemble the Pre-Filter
Align the slot position at the
bottom, and buckle up the upper
U-shaped buckle
3 4
Take out the HEPA filter Remove the protective film of
Hold both sides of the HEPA filter the filter
with both hands, and take out the
HEPA filter
7 8
Assemble the air inlet grill Assemble the filter on the
Align the slot position at the other side
bottom, press both sides of the
Repeat Steps 1-7 to assemble the
upper part of the air inlet grill, and
filter on the other side, and then
buckle up the air inlet grill
power on for operation
V.1
0 4