Control Panel; Trial Operation - EAS ELECTRIC EPUR660 Manual De Instrucciones

Ocultar thumbs Ver también para EPUR660:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating Manual

Control panel

Detection
display
Light sensing
PM2.5 detection
Timing
Speed button
function
In case of standby
button
Low, Medium
state (power-off
and High
state with electrici-
(optional)
ty), press the PM2.5
detection button
Display panel
Life progress bar of early
effect filter
Cleaning tips of the early
Pre-Filter
effect filte
Clean
HEPA Filter
Life progress bar of HEPA
Replace
filter
Cleaning tips of the HEPA
filter
0 5
Speed
Mode display
display
On/Standby key
Press to turn on/standby
Child Lock Combination
Mode key
the air filter; In case of
Long press
Button
Auto mode,
power-on state or standby
for 3s
speed
MODE
sleep mode
Long press the mode button
state .
and Turbo
and speed button for 3s
mode (optional)
simultaneously, and it is
available in case of
power-on state or standby
state (power-off state with
electricity)
PM2.5 numerical display
VOC quality indicator light
Child Lock instruction
Clean
Fair
Poor
Timing time display
V.1

Trial operation

Notes
This appliance is provided with a disassembly protection function; the appliance can only operate normally after the air inlet grill and air outlet grill are
assembled properly.
In case of continuous electricity, enter the working mode before the standby state, after each power on.
The appliance is connected to the power again after unexpected power outage (when the power is off or the power cord is unplugged during normal
operation), and then restores to the working state before the power outage.
1
Preparations
Power on for the first time, the display panel flashes for 1s, and
then the screen is turned off. The whole appliance is the standby
state;
Pre-Filter
Clean Fair
Clean Replace Poor
HEPA Filter
Clean Fair
Flash for 1s
3
Pre-heating
The particle sensor enters the preheating state, and PM2.5 sensor
digitally displays "----", and the then displays normally after 10s;
2
Switch
Press the On/Standby Button
4
Work
The purifier is powered on for the first time and
then enters the Auto mode.
V.1
0 6

Publicidad

Tabla de contenido
loading

Tabla de contenido