Technical Information - ECG ST 968 Manual De Instrucciones

2. Insert a slice of bread and press the toasting lever all the way down so the slice of bread is inserted into
the toaster. The toasting lever will return to the default position. The slice of bread inserted into the
toaster is automatically centred.
3. To adjust the browning setting during toasting, move the browning setting slide to another setting.
The toaster automatically switches off after the time set has lapsed. The slices of bread pop up from the
toaster.
4. For toasting frozen bread taken directly from the freezer, insert the bread into the toasting slot and
select the desired browning setting. Push down the toaster lever and then press the Defrost button. The
Defrost indicator light will go on.
5. For reheating bread that was already toasted once before, insert the bread into the toasting slot and
select the desired browning setting. Push down the toaster lever and then press the Reheat button. The
Reheat indicator light will go on.
6. Press the Cancel button if the bread is too dark or if the toasting process fails.
What you need to know about slices of bread/rolls
Type of bread, its moistness, content, age, thickness and number of heels. All of this aff ects the browning
setting. If you intend to toast two slices of bread next to each other, they should be of the same type, same
degree of moistness and of the same age (bread shall be kept in an enclosed package). Always keep sliced
bread, intended for toasting purposes, in a dry area.
The overall thickness of bread slices should not exceed 2.5 cm.
Any type of bread, small loafs and baked goods without toppings can be used in the toaster, including frozen
baked goods. In general, darker types of bread should be toasted at a higher browning setting than lighter
types. To obtain an especially light loaf of bread, spray it lightly with water prior to toasting. Rolls should be
turned one or twice during the crisp process.
Very thin slices will not be centred automatically and should be toasted at a lower browning setting to
prevent one side of the bread from becoming burnt.
CLEANING
Unplug the appliance and let it cool down before cleaning.
Slide the crumb tray out of the appliance and empty it. Use a scratch brush to remove burnt crumbs. Clean
the outer surface of the toaster with a damp cloth. Do not use sharp objects or abrasive cleaning agents to
clean the toaster. Do not immerse the toaster into water or use a dish washer to clean the appliance.

TECHNICAL INFORMATION

Nominal voltage: 220–240 V~ 50 Hz
Nominal input power: 900 W
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into
plastic recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specifi ed location for recycling electric and electronic equipment. Prevent
negative impacts on human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product,
refer to your local authority, domestic waste processing organization or store, where you purchased the
product.
This product complies with EU directive requirements on electromagnetic compatibility and
electrical safety.
The instruction manual is available at website www.ecg-electro.eu.
Changes in text and technical parameters reserved.
GB
08/05
15