Descargar Imprimir esta página

KRESS 1400 HKS Instrucciones De Servicio página 11

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
This and all other servicing must be carried out by our
service depots or by an electrician.
Mains cable
Damaged cables may not be used. They should be
replaced without delay.
Thanks to the new mains cable (9) with patent quick-action
lock this could not be more simple. Press the two lock
push-buttons (10) and pull the mains cable (9) out of the
handle. Feed a new mains cable into the handle and snap
it into place. Mains cable in various lengths are available as
accessories.
Only use mains cables with patent quick-action lock
for KRESS power tools! Do not try to drive other power
tools with it!
Noise/vibration generation
Measured values determined according to EN 60 745.
Typically the A-weighted noise levels of the machine are:
Sound pressure level:
Sound power level:
Measurement uncertainty: K = 3 dB.
Wear hearing protection!
The typically weighted acceleration is 1.5 m/s
Accessories included
Hex key SW 5 DIN 911
Rip fence
Accessories:
Circular blades Ø 190 mm, bore hole Ø 20 mm, hardened
metal tipped, alternating tooth
Order No.
Application
91492401
Wood and wood-like
materials, medium
quality
91519401
Wood and wood-like-
materials and plastics;
very suitable for coated
boards, clean cutting
Environmental Protection
Do not dispose of electric tools together with
household waste material!
Recycle raw materials instead of disposing as
waste.
The machine, accessories and packaging should be sorted
for environmental-friendly recycling.
These instructions are printed on recycled paper manu-
factured without chlorine.
The plastic components are labelled for categorised
recycling.
Specifications may be changed due to technical refine-
ments.
95 dB (A)
106 dB (A)
.
2
No. of teeth
14
48

Publicidad

loading