Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Special warnings:
PNI AT6000 alcohol tester should only be used to identify the presence of alcohol in the breathing
air. Do not use this device to determine whether it is safe to drive a vehicle, work with a machine,
do dangerous activities or determine the degree of intoxication in a person.
The organism of each person responds differently to alcohol consumption. Therefore, test results
with this device should be taken as a reference only.
The manufacturer, importer or retailer does not assume any responsibility for the use of this device.
This device should not be used to determine whether a person is capable of driving a motor
vehicle in a legal and safe condition. Alcohol consumption, even in small quantities, can affect
reflexes and the ability to make decisions.
Before using this device, read the manual carefully and follow the instructions.
Introduction
PNI AT6000 alcohol tester has an advanced sensor with high sensitivity, modern and practical
design, being thus a suitable object for personal use. For your safety, when the measured alcohol
concentration exceeds the maximum preset level of the device, it will emit a sound and display a
warning on the screen.
Main features:
•
Alcohol-efficient sensor
•
Quick response
•
Smart control via MCU (Micro Control Unit)
•
Blue illuminated LCD screen
•
Display on-screen test process
•
Portable design
•
Sound warning if the preset limits are exceeded
•
Automatic sensor error control
•
Low battery indicator
Technical specifications:
•
Detection range:
0.00 – 0.20BAC%; 0.00~2.00g/L; 0.00 – 2.00BAC‰~0.00 -1.00 mg/L; 0.00 – 200mg/100mL
•
Alarm threshold: 0.05BAC%; 0.50g/L; 0.50 BAC‰; 0.25mg/L; 50mg/100mL
•
Accuracy: ±0.02%BAC at 0.05%BAC
•
Power voltage: DC4.5V(3×AAA)
•
Power consumption: ≤120mA
•
Operating temperature: -10 °~50°C
•
Humidity: ≤95%
•
3-digit illuminated LCD display
•
Dimensions: 103 × 65 × 27mm
•
Weight: 64 g (without batteries)
•
Sensor lifespan: up to 2 ani
2
Publicidad
