Mogatec GBS 6050 LI EX Instrucciones De Uso página 12

GB | Operating Instruction
• Turn off power before cleaning.
• Beware! Keep your fingers away from the
cutting area !
• Only switch on the device if your hands and
feet are away from the cutting tools.
• Remove all debris from the working area
before use and pay attention to such debris
while working!
• Turn the machine off before transporting and
wait until the blade stops moving. Maintenance
and cleaning should be performed only when
the machine is turned off.
• Children and teenagers under 16 years of
age must never use this device!
• Be aware of third persons in the work area.
• Do not use the shears if other persons, children
or domestic animals are found nearby.
• Only use the trimmer in daylight or
sufficiently bright artificial illumination.
• The clippers must be subjected to regular
maintenance and checks. Damaged blades
must be replaced as a pair. Professional repair
is required if damage occurs due to impact.
• The trimmer should be regularly maintained
by an accordingly authorised service point.
• Wear suitable working clothes, i.e. protective
glasses, protective means for ears, non-slippery
shoes and working gloves. Do not wear broad
clothes which could be caught by the moving
parts.
• After you finish using the clippers and before
cleaning them, it is necessary to ensure that
the machine cannot be accidentally turned
on, such as by unlocking the switch.
• Check the cutting unit regularly for damage
• Never hold the clippers by the blades, you
may run the risk of injury even when the
clippers are not moving!
• Never touch moving blades in an attempt to
remove debris or if the blades are blocked.
Always switch off the device first if you want
to remove the battery pack.
• Before performing any work on the machine
such as maintenance or treatment, take out
the batteries.
• Keep the machine away from children and
store it in a safe place.
• When working with the shears, always take a
stabile standing position, particularly when
you are using steps or a ladder.
• Do not use shears with a damaged or excessively
worn-out cutting part
• Ensure that all protective devices and handles
11
are installed on the machine. Never try to put
an incomplete machine in operation.
• Always use the protective part designed for
the blade when transporting and storing the
shears.
• Before starting the work, make yourself familiar
with the surroundings and possible dangers
which you may not hear because of the noise.
• Only use the spare sparts and accessories
recommended by the manufacturer.
Before starting
Charging the battery
Safety Instructions:
The tool is delivered with the lithium-ion battery
charged. However, we recommend recharging the
battery before the tool is operated for the first time.
- Use the included charging unit for charging the
battery only. It is specially designed to match
the tool's battery.
- Never use other charging unit. This will result in
fire and/or explosion hazard!
- Always keep the charging unit clear of rain or
moisture. Hazard of electric shock! - Never
charge the battery in the open without protection,
always choose a dry, protected place.
- Never try to charge third-party batteries with
this charging unit. This will result in fire and/or
explosion hazard!
- Check the housing, plug and cable for damage
before each use of the charging unit. Do not use
the unit if you detect damage.
- Do not open the charging unit by force. In case
of a defect, the charging unit must be replaced.
- The charging unit heats up during the charging
process. Do not place the unit on a flammable
surface or operate it in a flammable environment.
Fire hazard!
- Never open the battery cells. Hazard of short
circuits!
- In case of damage to the battery, hazardous
vapours or fluids may escape. In case of incidental
contact flush with water and seek medical advice
immediately. The fluid may have irritating or
caustic effects on the skin.
- Protect the battery from heat, intense insolation
and fire. Explosion hazard!
Charging process:
To charge the battery connect the charging unit to