GB | Operating Instruction
oil. Do not lubricate the motor and other parts.
Should the blade become dull after a long period
of use, a spare part can be ordered.
Warning! The leading edges of the blades must be oiled
to ensure proper lubrication. If the leading edges are not
oiled, blade durability may be adversely affected.
If the cutting tools have become dull after long use
please replace them with original spare parts.
Clean the device using only a brush or cloth. Do never
wash down the device with water and do never dip the
device into water.
Apply protective spray to the blades after each use.
Replace blunt blades.
Always put on the blade guard after use.
Examine the tool for obvious defects and have it
repaired in an authorised service shop if required.
Storage
Always store the tool in a dry, clean place outside
the reach of children. Make sure that the place of
storage is frost-free.
Waste disposal and environmental
protection
Please observe the following directions for
the disposal of your accumulator/battery.
Batteries are not to be put into the rubbish. As a
con-sumer you are legally obliged to return used
batteries and accumulators. At the end of the dura-
tion of your apparatus, the batteries or accumula-
tors have to be taken from the apparatus, dispos-
ing of them separately. You have the possibility of
delivering your old batteries and accumulators to
the local collecting points of your municipality or to
your dealer or to the distribution centers.
If your device should become useless somewhere
in the future or you do not need it any longer, do not
dispose of the device together with your domestic
refuse, but dispose of it in an environmentally friendly
manner.
Please dispose of the device itself at an according
collecting/recycling point. By doing so, plastic and
metal parts can be separated and recycled. Informa-
tion concerning the disposal of materials and devices
are available from your local administration.
13