Product Description; Description; Operation And Use; Normal Operation - Pujol SPIDER PRO 600 Manual De Uso

Safety instructions
This device is not designed to be used by persons (including children) whose physical, sensory or mental capacity is impaired, or persons with little
experience or knowledge, unless they are under supervision or have received instructions on using the device by a person responsible for their safety.
Every month, check that the door reverses its movement when it encounters an object which is at least 50 mm high on the ground. If this is not the case,
contact your installer. Take care when using the manual back release device as a manual door can suddenly fall off if the springs are weak, broken, or
incorrectly balanced.
Frequently check the installation, particularly the cables, springs and mountings, to reveal any signs of wear, deterioration or incorrect balancing. Do not
use the system if a repair or adjustment is necessary as a fault in the installation or an incorrectly balanced door can cause injuries. Have the motorisation
checked every year by a qualified technician.
For all direct operations on the motorisation, please contact a qualified technician (installer).
In the event of incorrect operation, switch off the power supply, use the manual release device to enable access and request assistance from a qualified
technician (installer).
Before any handling or maintenance operations, disconnect the electrical power supply and if necessary, remove the battery (fig. 1).
Do not allow children to play with the door control devices. Keep remote controls out of the reach of children (fig. 2).
For the integrated lighting, only use a bulb with a maximum power of 24 V 21 W, BA 15s socket (fig. 3).
Monitor the movement of the door and ensure that people are kept at a distance until the end of the movement.
When using a switch without a locking device (for example: code keypad, etc.), ensure that other people remain at a distance.
Do not deliberately prevent the door from moving.
Do not try to open the door manually if the motor is not released.
Do not modify the motorisation components.
Never clean the motorisation system with high pressure water cleaning equipment.
1

PRODUCT DESCRIPTION

Description (fig. 4)
The Spider Pro 600 assembly has been designed for the motorisation of garage doors for
residential use. This motorisation is composed of:
- a motor head (No. 1) with integrated lighting (No. 2).
- a rail assembly (No. 3) with a manual back release device (No. 4).

OPERaTION aND USE

Normal operation

Operation in «Total opening» mode with a Vario Secure type remote control or similar (fig. 5)
Integrated lighting operation
The lighting comes on each time the motorisation is switched on. When the door stops moving, it goes off automatically after 30 seconds. Repetitive use will
cause the light to be lit constantly which may result in the light being switched off automatically due to thermal protection.
SPIDER PRO 600
2
5
2
automatismos pujol - - english
3
24V 21W max.
4