Dea Digipro Instrucciones De Uso página 17

3.15 Adding cards groups in ZONE 1
In setting mode:
• Press followed by
ard as reminder. Insert a 3-digit number (from 000 to 999) corresponding to the data storage
box where you want to save the first card of the group, then insert a second 3-digit number
(from 000 to 999 indicating the cards quantity that can be added. For example:
a) Inserting 005 060, it means that the cards added to the memory start from 005 and they
are 60.
b) Inserting 060 150, it means that the cards added to the memory start from 060 and they
are 150.
• Swipe the first card to be added or insert a serial number (8 digits), the sound "BI" indicates
that the card was corectly added.
Warning: After having learnt the first serial number, the next ones (for the number of cards
set) will be automatically saved.
• Press to exit the setting mode.
3.16 Modifying the user code of ZONE 1
In setting mode:
• Press followed by
heard as reminder. Insert a 3-digit number (from 000 to 999) corresponding to the data
storage box where you want to add a new password (the password length must be the same
as the admin code).
• Press to exit the setting mode.
(the yellow led blinks), then press
(the yellow led blinks), then press
followed by , a "BI" will be he-
followed by , a "BI" will be
15