Cleaning And Care - Unold 87813 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37

CLEANING AND CARE

Attention: The shaving head has sharp and pointed parts. Handle with care
in order to avoid injuries!
Always switch the appliance off using the EIN/AUS [ON/OFF] switch before
disconnecting the mains adapter from the wall socket.
1.
Never immerse the appliance or the lead cable in water or other liquids to
clean them. Make sure that no water penetrates the casing of the appliance.
2.
Never clean the appliance and the accessories in the dishwasher.
3.
Do not use any scrubbing sponges, abrasive agents, steel wool, metal objects,
disinfectants or hot cleaning agents, since they can damage the appliance.
4.
Clean the appliance with a soft, damp cloth.
Cleaning the shaving head:
5.
Switch the appliance off using the EIN/AUS [ON/OFF] switch before
disconnecting the mains adapter from the wall socket. Detach the comb
attachment from the appliance.
6.
Remove the shaving head pushing it carefully backwards.
7.
Clean the shaving head and the inside of the appliance with the brush
provided.
8.
Please do not knock the shaving head as this may damage it.
9.
Rinse the shaving head with lukewarm water drying it thoroughly with a soft
fluff-free cloth afterwards.
10. In order to eliminate residual moisture we additionally recommend to dry
the shaving head with a hair dryer (medium temperature adjustment).
11. Put a drop of care oil onto the shaving head and remove excessive oil with
a fluff-free cloth.
12. Reattach the shaving head to the appliance inserting the clips on the bottom
side into the appliance and pressing it upwards into place. Make sure that
the shaving head latches into place properly before using the appliance
again.
13. Protect the appliance from dust and regularly clean the shaving head with a
soft brush detaching it carefully from the appliance and removing dust and
hair using the brush. Reattach the shaving head.
14. Depending on the frequency of usage, the shaving head has to be replaced
regularly, but at the latest after two years. Specialist shops and our after-
sales service offer the corresponding replacement parts. The corresponding
order form can be found on page 51.
20
Copyright UNOLD AG | www.unold.de

Publicidad

Tabla de contenido
loading

Tabla de contenido