Beard Trimmer Operation - Unold 87813 Manual De Instrucciones

12. After finishing the hair cut, switch the appliance off pushing the button EIN/
AUS [ON/OFF].
13. Clean the appliance after every use.

BEARD TRIMMER OPERATION

To obtain perfect results, always work against the direction of hair growth.
Shaving will be easier if you tense the skin of the part you want to shave with
your free hand. After shaving we recommend to cream the depilated parts with
a mild body lotion in order to avoid skin irritation. If you have sensitive skin or
depilate sensitive parts, we recommend you to treat these parts only once in
order to avoid skin irritation.
1. Prepare the appliance as described in the chapter „Before first use" and
„Charging".
2. Detach the comb attachment pulling it off the appliance.
3. Make sure that the skin is clean and dry before you start using the appliance.
4. Start with the longest adjustment and, if necessary, carry out a test cut at a
hidden part of the body.
5. Switch the appliance on pushing the button EIN/AUS [ON/OFF].
6. Place the appliance on the skin and work against the direction of hair
growth, if possible. Do not use pressure on the appliance.
Legs: Shave your legs starting from the ankle and moving upwards against
the direction of hair growth.
Arms: The best results can be achieved when working from the outside of
the arm to the inside.
Underarms: Put your arm up as far as you can in order to tighten the skin.
Shave the area moving the appliance backwards and forwards.
Intimate area: With long hair use the comb attachment to do a pre-cut
attaching the accessory to the appliance. If necessary, tighten the area you
want to shave and move the appliance slowly over the skin against the
direction of hair growth.
Contour trimming: Carefully cut the hair according to the desired contour.
7. Make sure that the shaving head is always in contact with the skin. Shaving
will be easier, when you tense the skin with your free hand.
8. If hair gets caught in the shaving head, switch the appliance off and clean
the shaving head as described in the chapter „Cleaning and care".
9. After finishing the hair cut, switch the appliance off pushing the button EIN/
AUS [ON/OFF].
10. Clean the appliance after every use.
11. Directly after shaving do not use any care products that contain alcohol as
these may cause skin irritation. Use mild care lotions or creams instead.
Copyright UNOLD AG | www.unold.de
19