OK. OTF 801-W Manual Del Usuario página 18

Size - A5
ASSEMBLING AND MOUNTING
1
Remove the screws from
the lower end with a
screwdriver (not included).
4
Ensure that the supply
cord is fitted through the
corresponding opening.
CAUTION
• The product may only be connected to the mains once it has been completely
assembled.
• The appliance must not be disassembled during operation, general care, cleaning
and user maintenance.
• The product may never be operated without the stand or in a horizontal position.
OTF801-W_A5_121214.indb 18
18
2
Attach rear part of foot,
matching the screw holes.
Insert the screws and
fasten with a screwdriver.
5
Place on a stable level
surface.
3
Attach front part of foot,
matching the screw holes
with those in the rear
part of the foot. Insert the
screws and fasten with a
screwdriver.
14/12/12 1:54 PM