Window Kit Installation - Impecca IPAC-08NR Manual De Usuario

INSTALLATION OF THE AIR EXHAUST HOSE
1. Remove the hot-air outlet and remove the ex-
haust hose.
2. Fasten the air exhaust adapter to the exhaust
hose by twisting in a counter-clockwise direction.
3. Fasten the air exhaust hose directly to the
unit in a counter-clockwise direction.

WINDOW KIT INSTALLATION

The included window kit is designed for installation in most vertical or horizontal sash
windows. You may be required to slightly modify your specific installation to ensure safe
and proper use of your air conditioner unit.
Horizontal window:
Minimum width: 27.5" (70cm)
Maximum width: 48" (122cm)
STEP 1: ADAPT WINDOW BOARD SIZE
Insert the window exhaust port fitting into your window and extend the width or height to
fill your window entirely. Fasten the screw into section number 2 as shown below to keep
the extended portion from collapsing.
STEP 2: CONNECT AIR EXHAUST ADAPTER
Insert the air exhaust adapter into the window kit. Ensure the unit is placed on a level surface
at least 20" away from any walls or other obstacles. Your unit is ready to begin operation.
WALL AIR EXHAUST PORT MOUNTING
If you have an existing air exhaust port you can directly connect your portable air condi-
tioning unit to the port. For the best energy efficiency and to preserve the longest life of
your unit, avoid bending the hose and keep the exhaust hose length as short as possible.
Vertical window:
Minimum height: 27.5" (70cm)
Maximum height: 48" (122cm)
–7–