König HAV-IR20 Manual De Uso página 9

2.4.2 Setting the Wi-Fi Connectivity in infrastruct mode
1. Insert a Wi-Fi USB adapter into the USB connector. (The Wi-Fi USB adapter is optional)
2. then scroll up/down to [Network] and press ENTER/OK button.
3. Select [Manual Setup] and press ENTER/OK button
4. Select [Connect] and press ENTER/OK button
5. Then please follow the steps below:
Table 2.4.2
Network
Connect
Wizard
Manual Setup
Select [Manual Setup] and press
[ENTER/OK] button
SSID
SSID
Choose [NEXT] to search any AP
available
Encryption
Encryption Mode
Passphrase
Select [Encrytion] mode and then
choose [NEXT]
LAN Connect
→
>
>
Select [WLAN] mode, for example,
Auto Search
AP01
wireless
→
encryption, it will be marked with a
WPA2
> 0 0 0 0 0 0 0 0 0 0
→
>
ENTER/OK: Next
Key in the encryption code and then
9
Network
then choose [NEXT]
Site Survey
75%
100%
Available APs listed by signal
strength. If an AP is required
symbol of lock.
Passphease
0
press [ENTER/OK]
WLAN