Starting The Appliance; Temperature Guide - Monster euroflex IS 21 HS Manual De Instrucciones

STARTING THE APPLIANCE

5. Dry ironing
Getting the appliance ready:
- Put the iron on the iron-rest mat.
- Divide the garments to iron according
to the ironing temperature indicated
in the label. It is recommended to start
ironing the articles that require the
lowest temperature.
Turning the appliance on
- Put the iron on the iron-rest mat.
- Insert the plug into the mains socket.
- set the thermostat knob to the requi-
red position.

TEMPERATURE GUIDE

Heat setting markings on the adjustable control dial of all irons match those of theIn-
ternational Textile Care Labelling Code.
Symbol
Control knob
Do not iron
position
at all
Fabric
Ironing
Dry ironing
- Do not press the steam button.
Position of the iron
- During working breaks put the iron on
After dry ironing
- Turn off the appliance (on/off switch)
- Let the appliance completely cool
- Store the appliance in a dry place
Important: Store the appliance only
when it has completely cooled down.
120°C max
COOL
Nylon, Acetatese.
E.g. Acrilan Courtelle,
Orlon Triacetates,
e.g.Tricel/Polyester
Iron on wrong side
if moisturere quired
use damp cloth(Not
Acetate)
19
the iron-rest mat.
down.
away from the reach of children.
160°C max
WARM
Wool, Polyester mix-
tures e.g.Polyester/
Cotton
210°C max
HOT
Cotton, Linen Rayon,
Rayon mixtures, e.g.
Rayon/Linen
Fabrics requiring this
setting usually require-
steam pressing for hea-
vy cotton, denim etc.