Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell EVA 150 E Manual De Instrucciones

2.3 Technical data

Universal motor, radio and TV interference suppressed
Input power
Strokes at idling speed
Strokes at normal load
Sanding stroke
Sanding pad
Abrasive – for Velcro® fastening
Hose connector diameter
Weight without mains cable and front handle

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1 and EN 60745-2-4:
The measuring inaccuracy K is 3 dB.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.

2.5 Vibration specifications

Noise emission values determined according to EN 60745-2-4 :
at the main handle smaller than 2.5 m/s
at the front handle 3.6 m/s
The measuring inaccuracy K is 1.5 m/s

2.6 Scope of supply

Orbital disk sander EVA150E 3 / EVA150E 5 complete with:
1 abrasive grid Abranet - kit, P 60 – P 320
1 protective layer ø150 57-hole
1 universal filter bag with bracket
1 edge protection
1 carrying case
1 operating manual
1 folder with «Safety Instructions»
1 operating tool
Sound power level
94 dB (A)
2
2
2
Workplace-related emission value
83 dB (A)
-14-
230 V~, 50 Hz
350 W
12000 – 24000 strokes / min
9000 – 20000 strokes / min
3.0 mm (at EVA150E 3)
5.0 mm (at EVA150E 5)
Ø 150 mm
Ø 150 mm
35 mm (1 3/8 in.)
2.15 kg (5.9 lbs)