Specification; Worthy Information - Lacor 69079 Instrucciones De Uso Y Mantenimiento

Warranty Information
This manual provides the installation, safety and operating instructions for the multifunction
robot. We recommend all installation, operating and safety instructions appearing in this
manual to be read before installation or operation.
Multifunction robot is a product of extensive research and field testing. The materials used were
selected for maximum durability, attractive appearance and optimum performance. Every unit is
thoroughly inspected and tested before shipment.
IMPORTANT!
If the unit changes ownership, be sure this manual accompanies the equipment.
1.- Plug multifunction robot into a properly grounded electrical outlet of the correct voltage,
size, and plug configuration. If the plug and receptacle do not match, contact a qualified
electrician to determine the proper voltage and size, and install the proper electrical outlet.
2.- To avoid any injury, turn the power switch off, unplug the unit from the power source and
allow to cool before performing any maintenance.
3.- For safe and proper operation, the unit must be located at a reasonable distance from
combustible walls and materials. If safe distances are not maintained, discoloration or
combustion could occur. Do not locate multifunction robot under shelving or closer than
12" (31 cm) from the ceiling.
4.- Allow a minimum of 12" (30 cm) clearance along the sides. Allow a clearance of 20" (50 cm)
along the front and rear discharge to endure proper operation and safety.
5.- To prevent any injury or damage do not pull unit by power cord.
6.- To prevent any injury, discontinue use if power cord is frayed or worn.

SPECIFICATION

MODEL:
VOLTAGE:
CYCLE:
POWER:
CAPACITY:
SPEEDS:
SIZE:
NET WEIGHT:

WORTHY INFORMATION

Keep these instructions for future reference.
WARNING
69079
220-240V
50-60Hz
800W
1,50 Lts.
10 Speeds
24x22x40 Cm.
6,50 Kgr.
25