Horotec MSA19.875 Manual De Instrucciones página 3

MSA19.875
MSA19.875
1. DESCRIPTION OF THE EQUIPMENT
Air flow / vacuum device for one working station.
This device requires a compressor to operate.
The integrated Venturi system transforms the forced air in vacuum.
Maximum pressure input : 6 bar.
Delivered with :
- 1 pedal MSA19.875-B
- 1 filter MSA19.875-A
- 1 hose Ø 6 mm MSA19.826, length 3 metres (pedal power)
- 1 hose Ø 8 mm MSA19.851, length 3 metres (vacuum pen power).
Delivered without vacuum pen or brush.
2. INSTRUCTIONS FOR USE
CONNECTING THE PEDAL TO THE DEVICE
To connect the pedal to the device, use 2 hoses Ø 6 mm as follows :
- Connect the first hose between the connector no. 1 of the pedal and the connector no. 2 of the device (1)
- Connect the second hose between the connection no. 2 of the pedal and the connector no. 1 of the device (2).
CONNECTING THE VACUUM PEN TO THE DEVICE
To connect the vacuum pen to the device, use 1 hose Ø 8 mm and a filter as follows :
- Connect the hose into the connector no. 3 of the device (3)
- Cut the hose ; length of approximately 10 cm
(F)
- Insert the filter at the end of the hose
- Connect a new hose Ø 8 mm in the filter and cut it at the desired length (T).
(T)
(F)
(3)
(4)
(1) (2)
(2)
(1)
P. 1/2