Technical Description - Dometic Waeco PerfectCharge DC08 Instrucciones De Montaje Y De Uso

PerfectCharge/PerfectPower
 DCDC10 (item no. 9102500061): 24 Vg input voltage to 27.6 Vg output
voltage (voltage converter)
All the converters can also be use to charge lead batteries.
A
NOTICE!
Never use the device to charge other battery types (such as NiCd
or NiMH).
The charge voltage has an IU charging characteristic with a charge voltage
of 13.8 V/27.6 V.
On charge converters, the output voltage is regulated to 14.2 V. This means
the battery is charged more quickly.
A
NOTICE!
Charge converter: Do not charge for longer than twelve hours.
5

Technical description

The light weight and compact construction allows the converters to be easily
installed in mobile homes, commercial vehicles or motor and sailing vessels.
The transformers convert a 12 Vg or 24 Vg supply from a car or boat battery
to a stable 12 Vg or 24 Vg voltage for connecting to equipment.
The isolation of the input and output voltages means the output voltage can
be kept stable without interference from the input circuit.
Because the maximum output current is electronically regulated, the charge
converters can be used to charge batteries to generate electricity in cars or
on boats.
The devices are equipped with protection against shorting and overloading.
If the protective function triggers, the device switches off and then switches
on again when correctly connected or when the load has been adequately
reduced.
EN
Technical description
29