Cleaning & Storage - ProBreeze PB-H12 Manual De Instrucciones

Ocultar thumbs Ver también para PB-H12:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
CLEANING & STORAGE
WARNING: Always turn the heater OFF, unplug the power cord from the electrical outlet and
allow the appliance to completely cool down before handling or cleaning it.
CAUTION: Do not allow water or other liquids to run into the interior of the heater, as this
could create a fire and/or electrical hazard.
CAUTION: Do not use any abrasive cleaners or solvents, as heater damage will occur.
Clean the exterior surface of the heater by wiping it with a soft, damp cloth. Dry the
heater with a soft clean cloth.
Clean the air inlet and outlet grills regularly with a vacuum cleaner, using the brush
attachment to avoid any dust build-up.
To store your product out of season, we recommend using the original or similar size
box.
Do not kink or wrap the power cord and plug around the appliance, as this may cause
the insulation to weaken or split, particularly where it enters the appliance.
Store the heater in a safe, clean and dry place when not in use.
MAINTENANCE
The heater requires little maintenance. Do not try to fix it by yourself. Refer it to qualified
service personnel if service is required.
To ensure adequate air circulation keep vents at the rear of the heater free of dust. Do not
disassemble the heater to remove dust.
MINI CERAMIC SPACE HEATER | MODEL PB-H12
Heat output
Nominal heat output
Minimum heat output (indicative)
Maximum continuous heat output
Auxiliary electricity consumption
At nominal heat output
At minimum heat output
In standby mode
5 | English
Symbol
Value
Pnom
2.0
Pmin
1.2
Pmax,c
2.0
elmax
N/A
elmin
N/A
elsb
0.0
Unit
kW
kW
kW
kW
kW
kW

Publicidad

Tabla de contenido
loading

Tabla de contenido