Technical Data; Noise/Vibration Information; Mounting And Operation - Bosch EasyGrassCut 23 Manual Original

20 | English

Technical Data

Grass trimmer
Article number
Rated power input
No-load speed
Cutting line diameter
Cutting diameter
Cutting spool capacity
Weight according to EPTA‑Proced-
ure 01:2014
Protection class
Serial number
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Noise/Vibration Information

Noise emission values determined according to EN 50636-2-91.
Typically the A-weighted noise levels of the product are:
– Sound pressure level
– Uncertainty K
– Sound power level
– Uncertainty K
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 50636-2-91
– Vibration emission value a
h
– Uncertainty K

Mounting and Operation

Action
Product features
Delivery scope
Removing the transport safety
Connecting the shaft
Adjusting the Handle
Mounting the protection guard
Connecting the extension cable
Switching On and Off
Removing the line spool
Winding line on spool
Mounting the line spool
Line feeding
Maintenance, Cleaning and Stor-
age
Accessories
F 016 L94 033 | (04.06.2020)
EasyGrassCut 23
W
-1
min
mm
cm
m
kg
dB(A)
dB
dB(A)
dB
2
m/s
2
m/s
Assembly
Caution: Switch the garden tool off and pull the mains
u
Figure Page
plug before performing any maintenance.
A 324
Connect shaft (see figures C and D)
B 325
Note: A connected shaft can no longer be dismounted.
C 325
Remove the transport safety (7).
D 326
Connect the individual parts of the shaft until they can be
E 326
heard to engage.
F 327
Mounting and adjusting the handle (see figure E)
328
G
The handle (1) can be set to different positions. To change
the adjustment, press buttons (5) and move the handle to
H 328
the desired position. Release the buttons (5) again so that
I 329
the handle can engage.
J 329
Mounting the protection guard (see figure F)
K 330
Before mounting the protective guard, pull the plant-protec-
L 330
tion frame from the delivery position to the storage position.
Position the protection guard (6) on the trimmer head and
M 331
fasten it with the provided screw.
Do not disassemble guard once connected.
3 600 HC1 H..
280
12500
1.6
23
4.0
1.9
/ II
see type plate on garden tools
3 600 HC1 H..
78
= 2.5
90
= 2.0
< 2.5
= 1.5
EasyGrassCut 26
3 600 HC1 J..
280
12500
1.6
26
4.0
1.9
/ II
3 600 HC1 J..
80
= 2.5
91
= 1.0
< 2.5
= 1.5
Bosch Power Tools