Servicing And Repair; Technical Specification - Stuart SCT1 Instrucciones De Funcionamiento

Servicing and Repair

WARNING: Ensure the hotplate is
disconnected from the mains electricity
supply before attempting maintenance or
servicing.
This equipment does not require routine
servicing. The only maintenance required is to
clean external surfaces with a damp cloth and
mild detergent. Spillages or splashes should be
cleaned up straightaway after isolating the
hotplate from the mains electricity supply.
Repairs
In the event of product failure it is recommended
that any repair is only undertaken by suitably
qualified personnel.
Only spare parts supplied by Bibby Scientific
or its agent should be used. Fitting of
non-approved parts may affect the
performance of the safety features of the
instrument.
For a comprehensive list of parts required by
service engineers conducting internal repairs, or
to receive a service manual, please contact the
Service Department of Bibby Scientific Ltd
quoting both the model and serial number.
Bibby Scientific Ltd.
Beacon Road, Stone,
Staffordshire ST15 0SA
United Kingdom
Tel: +44 (0)1785 812121
Fax: +44 (0)1785 810405
e-mail sales@bibby-scientific.com
www.bibby-scientific.com
For any other technical enquiries, please contact
the Technical Support Department:
E-mail: stuarthelp@bibby-scientific.com,
Tel: +44 (0)1785 810433.
6
Accessories
A range of accessories detailed below is available
for use with the SCT1 temperature controller.
Part code Description
SCT1/1 Probe holder
SCT1/2 PTFE probe
SR1 Retort rod
SCT1/MP Spare metal probe
Warranty
Bibby Scientific Ltd. warrants this equipment to
be free from defects in material and
workmanship, when used under normal
laboratory conditions, for a period of three (3)
years. In the event of a justified claim, Bibby
Scientific will replace any defective component or
replace the unit free of charge.
This warranty does NOT apply if damage is
caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage caused by
installation, adaptation, modification, fitting of
non-approved parts or repair by unauthorised
personnel.
Bibby Scientific Ltd.
Beacon Road, Stone,
Staffordshire ST15 0SA
United Kingdom
Tel: +44 (0)1785 812121
Fax: +44 (0)1785 810405
e-mail sales@bibby-scientific.com
www.bibby-scientific.com

Technical Specification

Probe
Temperature range ºC
Accuracy, ºC
Resolution
Dimensions, mm (w x d x h)
Net weight, kg
IP rating
Stainless steel
20 to 200ºC
±0.5ºC
1ºC
90 x 75 x 123
0.3 (inc. probe)
54