Morso 7400 Instrucciones De Montaje página 6

Assembling the base/pedestal for the Morsø 7400
After unpacking, remove the loose parts from inside the stove. Remove the ash drawer and
cast grate. Then, lie the stove down on its back, preferably with the cardboard packaging as
a base to prevent chafing.
Unpack the base, which has been sent in separate packaging. Unscrew the 4 screws in the
base of the stove. Place the plinth and screw the four screws back into the baseplate of the
stove.
Assembling the base closed
After removing the blanks before lying the stove down, remember to re-fit them correctly
before lighting your first fire.
6