Heater Soleado Fuego Plus - Kemper SOLEADO FUEGO PLUS Manual De Usuario

SUGGESTED LPG GAS TANK
The LPG is delivered to users in portable containers (tanks) to be
replaced when it is exhausted with new ones. Gas cylinders respond to a
set of rules emanating from the body responsible for determining the
materials and the tests. The KEMPER heater is suitable for the installation
of LPG tanks from 10 to 15 kg.
Standard-size gas tanks according to regulations UNI-CIG 7051/72.
It is suggested to check the integrity of the hose at least one a month
and every time the gas tank is changed. If shows sign of cracking,
splitting or other deterioration it shall be exchanged for new hose of the
same length and equivalent quality.
Performing these operations successfully, you can proceed with the ignition of the heater.

HEATER SOLEADO FUEGO PLUS:

•
press and rotate the gas / knob counterclockwise about 15 °
•
Holding the knob in position, press the red spark button underneath the knob until the pilot light is
switched on (Figure 11)
•
With activated pilot flame, leave the red power button while holding and holding the knob for 10 to
20 seconds
•
leave the knob and check that the pilot remains lit; repeat the operation if the pilot shuts off
NOTE - to turn off the heater, turn the knob back to 0 = ZERO (Figure 11).
POSSIBILITY TO PARZIALIZE: all KEMPER heaters offer the possibility of partial operation
removing about 20% of the thermal power if you want to decrease the heating intensity to obtain a different level of
comfort or adapt it to different outdoor temperatures.
With the pilot light on, turn the knob to MAX or MIN as on the label (Figure 11) until the desired comfort level is
reached.
Page | 28
IGNITION
Figure 11
GAS TANK
(max-med-min) by
EN