IFM Electronic E7377A Instrucciones De Uso página 8

ENGLISH
GB IRL
The FC splitter is used to add
• an AS-i spur (yellow / yellow)
• or a spur for the external auxiliary voltage (black/black)
Installation remarks / Mounting
• Adhere to the relevant national regulations and provisions.
Disconnect the power supply.
Important notes
Ensure when replacing the FC splitter that the pierced points on the
AS-i flat cable are either used again or are placed within the black seal
area of the FC splitter.
Mounting of the lower part
Select a plane mounting surface. Screw the lower part onto the mount-
➀
ing surface (mounting holes ); the mounting screws are not supplied.
1 1
8