Introduction To Use - Femi Fox F50-842 Manual De Instrucciones

INDEX
1 INTRODUCTION TO USE ........................................... 7
2 INSTALLATION .......................................................... 9
3 USE ........................................................................... 12
4 MAINTENANCE ........................................................ 12
1

INTRODUCTION TO USE

Before using your suction fan, please read this instruction
manual very carefully in order to become familiar with the
machine and its recommended use.
Do not lose this manual as it is an essential part of the
machine itself. We recommend you always refer to it in
order to operate the machine in the best and safest way
possible.
Keep the manual with the machine and handy at all times
to be consulted whenever necessary.
Use the machine exclusively for the uses specifi ed below,
follow manual instructions carefully and never try to force
or to tamper with it, or to use it inappropriately.
F50-842_ISTRUZIONI.indd Sez1:7 F50-842_ISTRUZIONI.indd Sez1:7
1.1 CONVENTIONAL SYMBOLS
Before starting work with your sawing machine, carefully
read this instructions manual so that you are familiar with
the machine and its uses and where it should not be used.
Keep this manual in a safe place.
Do not underestimate the symbols "HAZARD" and
"CAUTION" in this manual.
Symbols and notes precede all hazardous operations both
to give safety messages and to draw the users' attention
to danger and also to outline the appropriate behaviour to
adopt to avoid such events.
The three symbols used and relative wording are the
following:
WARNING: high risk behaviour which could be
severely harmful.
WARNING: behaviour which could be moderately
harmful or damage objects.
NOTE: the notes preceded by this symbol are of a
technical nature and simplify use.
1.2 SAFETY AND RULES
The machine was designed and built according to the
Community Directives in force: 2006/42/EC, 2011/65/EU,
2012/19/EU, 2014/30/EU, 2014/35/EU.
The enclosed CE Declaration of conformity, togheter with
the CE mark on product, essentially comprise and are
an integral part of the machine: both guarantee product
conformity with the aforesaid safety Directives.
1.3 STANDARD SAFETY PROCEDURS
- Do not use the machine in very damp places or in the
presence of infl ammable liquids or gases.
- Do not use the machine outdoors in adverse weather
or environmental conditions (explosive atmospheres,
storms or rain).
- Wear appropriate clothing: do not wear loose-sleeved
garments or objects such as scarves, chains or
bracelets which may get caught in machine's moving
parts.
- Always use personal protective gear: standard accident-
prevention goggles, well-fi tting gloves, earphones or
earplugs and headgear to cover hair if necessary.
- Handle the power supply cable with care: do not use it
to lift the machine or to pull the plug out of the socket.
Keep it away from cutting edges, oily patches and high
temperatures.
- When in need, only use approved power supply cable
extensions.
Any power cable extensions must be type approved
abd comply with safety standards.
- Avoid using the machine if your psycho-physical
condition are precarious or upset or under the effects
of alcohol or sedatives.
7
17/05/2016 14.53.16 17/05/2016 14.53.16