Part Identification; Connection To Power Supply; Filling The Water Tank - Grunkel PLV-900 Manual De Instrucciones

Part identification

Num. Description
1 Handle with water tank
2 Foldable handle button
3 Dual voltage selector
4 Soleplate
5 Steam selector
6 Temperature control knob
7 Light indicator
8 Steam jet selector
9 Water-fill hole

Connection to power supply

This appliance has a dual voltage selector. This selector allows the appliance to be
plugged into different supply voltages. Ensure the supply voltage matches the voltage
indicated in the rating label of the product.
IMPORTANT: the appliance should be plugged only to an earthed supply with the co-
rrect voltage and in accordance to current security regulations.
Foldable handle
Before the iron is used, press the handle release and fold the handle upwards until it
locks securely into the operating position.
After use, the handle can be folded down again for space saving storage by pressing the
release button.
Steam selector
With the steam function activated, an additional hot steam jet is emitted from the so-
leplate. In order to use the steam function, the temperature control must be set to the
steam-section marked on the control knob.

Filling the water tank

Fill the water reservoir before using the steam function. Remove the plug from the wall
socket before filling the reservoir.
14