Main Components - SOLAC CT8630 Instrucciones De Uso

• Do not use your pillow if the power cord is damaged or the appliance is
faulty. Take it to an Authorized Service Centre to have it repaired or replaced,
as proper tools are required to do so.
• If you decide not to use the pillow again, it is best to put it out of service.
To do so, unplug the appliance and cut the power cord. In addition, it is
best to disable the parts of the appliance that could be dangerous, espe-
cially for children, as they might use it improperly during play.
• Check the pillow frequently for signs of wear or damage. If these signs ap-
pear, or if the product has been used improperly, take it to an Authorised
Service Shop.
• Electrodomésticos Solac, S.A. hereby disclaims all liability for injuries or dam-
age that could be caused to persons, animals or property due to the failure
to heed these warnings.

MAIN COMPONENTS

1.- Cover
2.- Pillow
3.- Power cord
4.- Control
4.1. ON/OFF switch
4.2. Temperature
4.3. Temperature position
4.4. Countdown on the timer
4.5. Time selected before switching off automatically
4.6. Temperature button
4.7. Timer button
4.8. Selection increase button
4.9. Selection reduction button
USER INSTRUCTIONS
• Connect the power cord (3) first to the product and then connect it to the
mains.
• Place the switch on the control (4.1) in the ON position.
• The selection that appears on the screen automatically is the minimum
temperature position 1 and 120 minutes of operation before the appliance
switches off automatically.
10
CT8630-8635-8650 10 10/10/06, 10:18:16