Safety Instructions; Machine Features; Design; Energy Box - Festool EAA Manual De Instrucciones

Before extracting hazardous, combustible or
explosive materials, make sure that the con-
nected extraction system is suitable for these
materials. Observe all applicable industrial
safety regulations.
Festool accepts no liability for damage and
accidents resulting from improper or incor-
rect use of the EAA or ASA, or subsequent
modifications made by the user.
4

Safety instructions

Warning! Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
– The additional weight on the EAA/ASA
(e.g. weight of electric or pneumatic tools,
accessories) must not exceed 12 kg.
– Inspect the electric cables for damage at
regular intervals. Have a qualified electri-
cian or Festool after-sales service techni-
cian replace damaged cables with new
cables.
– Ambient conditions: the room temperature
must be between 0° C and 50° C. Air hu-
midity must not exceed 80 %.
5

Machine features

[1-1] Tool holder
[1-2] Aluminium pipe
[1-3] Permanent socket
[1-4] On/Off switch
[1-5] Socket AUTO 2
[1-6] Compressed air connection* for
pneumatic tools, adjusted via the
pressure regulator on the mainte-
nance unit
[1-7] Lock
[1-8] Extractor connector
[1-9] Socket AUTO 1
[1-10] Slide* for opening and closing the
extractor connector
[1-11] Unlubricated compressed air connec-
tion on EW version only*
* not on all versions included in the scope of
delivery
6

Design

6.1

Energy box

The EAA energy box consists of two sections:
– Section containing electrical components
such as sockets and selector switches for
electric power tools (EW).
– Section containing pneumatic components,
including connections for pneumatic tools
(DW).
6.2

Versions

The different versions offer the following fea-
tures:
EAA EW CT/SRM/M
– 3 sockets, 1 non-adjustable, unlubricated
compressed air connection (not suitable
for connecting Festool compressed air
sanders!).
– Manually operated slide.
L The slides are linked mechanically. Dust
can therefore only be extracted from one
machine at any one time. The slide setting
is monitored by a microswitch.
EAA EW TURBO/M
– 3 sockets, 1 non-adjustable, unlubricated
compressed air connection (not suitable
for connecting Festool compressed air
sanders!).
– Manually operated slide.
L Dust can be extracted from two machines
at the same time. The slide setting is
monitored by a microswitch (basic posi-
tion: slide closed).
EAA EW/DW CT/SRM/M
– 3 sockets, 1 maintenance unit (pressure
regulator, condensate trap, lubricator), 2
adjustable, lubricated compressed air con-
nections, 1 non-adjustable, unlubricated
compressed air connection (not suitable
for connecting Festool compressed air
sanders!).
– Manually operated slide.
L The slides are linked mechanically. Dust
can therefore only be extracted from one
machine at any one time. The slide setting
is monitored by a microswitch.
EAA EW/DW TURBO/M
– 3 sockets, 1 maintenance unit (pressure
regulator, condensate trap, lubricator), 2
adjustable, lubricated compressed air con-
nections, 1 non-adjustable, unlubricated
compressed air connection (not suitable
EAA
GB
19