Hazet-Werk 4902/6 Instrucciones De Uso página 11

4. Storage
The device has to be stored
according to the following
conditions:
• The device must not be stored outdoors.
• Store the device in a dry and dust-free
place.
• Do not expose the device to liquids or
other aggressive substances.
• Storage temperature: -10 up to +45°C
• Relative air humidity: max. 60%
For Your Safety
5. Dangers emanating from the
device
1. Before each use, check the Inside Spring
Vice for full operatability. Do not use the
Inside Spring Vice if the operatability can-
not be ensured or if damage is detected. If
the Inside Spring Vice is used, although its
full operatability cannot be ensured, you
risk severe injuries to persons and damage
to property.
Full operatability is given when:
– the appliance is smooth running
(spindle
use);
– the spindle's location head is absolutely
damage-free;
– the headless set screw
the end of the spindle (limit stop);
– the bearing of the driving nut
smooth-running;
– the tensioning jaws
absolutely damage-free.
2. When tensioning the spring, it is important
that the spring windings do not come into
contact with each other because the
spindle may get overloaded and may
break.
3. Only use appropriate tensioning jaws (see
"Application" on page 13).
4. The spring (illustration 4, page 14) must
rest securely outside of the inner rib.
Please make sure that the spring cannot
slide out of the tensioning jaws.
5. The tensioning jaws have to be used and
changed in combination only and as inten-
ded for their use.
6. For safety reasons, modifications of the
Inside Spring Vice are strictly forbidden.
Any modification of the Inside Spring Vice
will lead to the exclusion of liability.
USA
must be greased before each
is inserted at
a
and are
GB
is
11