Pre-Operation - Goodyear GOD2112 Manual De Instrucciones

3. Mount the nozzle or any other equipment
you want to use.
4. Connect the machine to the water and
power supplies.
INSTALLATION, ELECTRICAL
AND WATER CONNECTIONS
1. pressure cleaner 2. water supply hose
3. water connection 4. water inlet
5. high pressure tube
6. water outlet(backside)
7. spray gun 8. power supply
* No. 2, 3, 8 are not included

Pre-operation

ADJUSTING FAN PATTERN
A wide fan pattern will distribute the impact
of the water over a larger area, resulting in
excellent cleaning action with a reduced risk
of surface damage, Large surface areas
can be cleaned more quickly using a wide
fan pattern. (See Figure 2)
NOZZLE CLEANING INSTRUCTI-
ONS
A clogged or partially clogged nozzle can
cause a significant reduction of water
coming out of the nozzle and cause the unit
to pulsate while spraying. To clean out the
nozzle:
•
Turn off and unplug unit.
•
Turn off water supply. Relieve any
pressure trapped in the hose by squeezing
trigger 2-3 times.
•
Separate lance from gun.
•
Rotate nozzle to the narrow stream setting.
This opens up the fan blades.
•
Using included tip cleaner, or an unfolded
paper clip, insert wire into the nozzle hole
and move back and forth until debris is
dislodged. (See Figure 3)