Tabla de contenido
Publicidad
WAXING &
POLISHING
Visit www.shurhold.com/waxing for the latest in how-to videos
including the proper technique for waxing and polishing.
Prior to the use of your Shurhold Dual Action Polisher Pro, be sure your boat, car or
other desired surface is clean and dry. Avoid using your polisher on a dirty surface, it
may cause damage, such as scratches or swirls, to the paint or gel coat.
Shurhold recommends that a polymer based wax alternative, such as Shurhold's Pro
Polish, be used for the most significant improvement in the surface's appearance. Pro
Polish is a paint and fiberglass/gel coat cleaner, sealant and polish with UV inhibitors
that produces an ultra high gloss finish in one easy step. Formulated with cosmetic
grade ingredients, it contains no fillers or talc, protecting your finish against sun, salt,
acid rain and other harsh environmental elements.
For best results, use Shurhold's Pro Polish, Pro Polish Pad and Microfiber Bonnet and
follow these steps:
STEP 1
Start with a clean, dry Shurhold Pro Polish pad.
STEP 2
Apply Pro Polish to the pad in a ring pattern, as
shown in Figure A.
STEP 3
With the switch in the off position, dab the pad
against a 2 foot square area to distribute the polish.
8
WAXING & POLISHING
Pro Polish
Liquid Wax
Sealant & Polish
30202 - 16 oz. (473 mL)
30203 - 1 gal. (3.78 L)
Pro Polish is a surface cleaner,
sealant and polish with UV
inhibitors that produces an ultra
high gloss finish in one easy step. Better than
a wax, Pro Polish is formulated with cosmetic
grade ingredients and contains no fillers or talc,
protecting your finish against sun, salt, acid rain
and other harsh environmental elements.
Dual Action Polisher PRO User's Guide
®
Publicidad
Tabla de contenido
