Retreiving Data - Parrot Sequoia Manual De Usuario

Via the Sequoia web interface
1. Visit the Sequoia support page: www.parrot.com/fr/support/
2. Download the update file available in .plf format.
3. Connect to the Sequoia web interface.
4. Go to Settings.
5. Click on Update Sequoia.
> An explorer window opens.
6. Select your update file and click Open.
> A Send button appears in the Settings page.
7. Click the Send button.
> The update launches automatically.

RETREIVING DATA

It is recommended to transfer your data to a computer after each flight.
You can transfer your data in three different ways: via USB, via Wi-Fi and
via an SD card.
The photos taken by Sequoia are in .tiff format for the four monochrome
sensors, and in .jpeg format for the RGB sensor.
Via USB
1. Using the micro USB cable (supplied), connect the micro USB device
port on the multispectral sensor to your computer.
2. In Windows: go to Start > Computer > Sequoia
> Internal. This will take you to the multispectral sensor internal me-
mory. You can retrieve the photos taken during the flight.
22