Sleep Or Sleep-And-Wake To Radio; Auxiliary Audio Input From External Device - Coby CRA50 Manual De Instrucciones

2. To cancel the snooze operation and turn the
alarm timer off completely, set the FUNC-
TION switch [4] to the "OFF" position.

Sleep or Sleep-and-Wake to Radio

1. Turn the radio on to tune to the desired radio
station and set the desired volume level.
2. To Sleep to Radio: Set the FUNCTION
switch [4] to the "OFF" position.
To Sleep-and-Wake to Radio: Set the FUNC-
TION switch [4] to the "AUTO" position.
3. To activate the Sleep timer, press the SLEEP
button [9]. The clock will display "0:59" to
indicate the default sleep period. The radio
will turn off automatically when the sleep
period is over (59 minutes).
4. To increase the sleep period: Hold the
SLEEP button [9] and simultaneously press
the HOUR button [6]. The sleep timer will
increase by one hour to "1:59" (1 hour and
59 minutes).
To reduce the sleep period: Hold the
SLEEP button [9] and simultaneously press
Operation
the MINUTE button [5]. The sleep timer will
decrease by one minute.
5. To turn the radio off before the sleep timer is
over, press the SNOOZE button [10].
Auxiliary Audio Input From
External Device
1. Set the AM/FM/AUX switch [12] to the "AUX"
position.
2. Set the FUNCTION switch [4] to the "ON"
position.
3. Use a 3.5mm male to male audio cable to
connect the Headphone / Audio Out jack of
the external device to the AUX IN jack [13] of
the CRA-54/50.
4. Adjust the volume to a comfortable listening
level and start playback on the external de-
vice. You may also use the VOLUME dial [14]
of the CRA-54/50 to adjust the volume level.
Page 7