CasaFan FB-FNK LCD Touch Instrucciones De Montaje página 14

Operation and functions of the remote control FB-FNK LCD Touch
EN
IMPORTANT: After completing the installation and restarting the mains voltage, briefly touch the fan
speed symbol (
chain of your fan until it runs at highest speed.
If your fan has a light, briefly touch the light icon on the display (
lit, pull the pull switch on the light kit to turn on the light.
Do not change the position of the pull switches from now on!
Symbols and operation with the hand-held transmitter
TIMER
DELAY 3 Min
Mounting the wall bracket for the handheld transmitter of your remote control
If necessary, you can mount the wall bracket of the remote control on a wall as shown in Fig. 7.
14
) on the remote control display to turn on the highest speed. Now pull the pull
Touch briefly and release immediately to turn your
ceiling fan on or off.
Touch briefly and release immediately to decrease the
speed of the engine by one of the 4 steps.
Touch briefly to select the time from 1 - 12 hours after
which your ceiling fan switches itself off automatically
(sleep-timer).
By briefly touching it, you switch the lighting of your
ceiling fan, if present, on or off.
When the light is switched on and touched briefly, it
switches off after 3 minutes.
Touching briefly with the light switched off switches it
on and off after 3 minutes.
) to turn on the light. If the light is not
TIMER
Fig. 7
ON
100
DELAY 3 Min