Repetition Of Chapter/Track/Title - Change Audio Language - Phonocar X Slim VM 011 Manual De Instrucciones

Repetition of Chapter/Track/Title • Title Menu
Audio-language-switch • PAL/NTSC • Zoom
Menu
Vol -
1
4
7
0
Title
Switch
Audio
Repetition of Chapter/Track/Title
During reproduction, press RPT.
It is possible to activate the repetition-mode, by pression
the RPT-key on the remote-control unit.
DVD
→ Repeat Chapter → Repeat Title → OFF →
Pressing the RPT-key once, Chapter will continuously be
repeated, Pressing twice, the Title will continuously be
repeated.
Pressing a third time the RPT-key, the repetition-function
will be cancelled.
SVCD/VCD/CD/MP3
→ Repeat single → Repeat ALL → OFF →
During the RepeatSingle-mode, the same track will always
be reproduced. In the RepeatAll-mode, all tracks will be
reproduced.
Title-Menu (exclusively with DVDs)
If the DVD has various registered Titles, it is possible to
reproduce the preferred Title from the Title-menu.
1 - Press TITLE during reproduction. The display will show
the Title-menu.
2 - Press the cursor shown on the display. Select the
desired Title and confirm with ENTER.
AUX DISP
Setup Pause
Enter
Play
Vol +
2 3
5 6
8 9
10+
Goto Mute
Zoom
RPT Slow ZOOM
Repetition
Sub-
Angle P/N
Title
PAL/NTSC
Audio-Language-Change
DVD
With DVDs offering the "multi-audio"-function, it is pos-
sible to change the language even while reproduction is
in course.
During reproduction, language will change every time the
AUDIO-key is pressed, in due relation with the languages
registered on the disc.
NOTE:
• The language selected with the "default"-command
gets activated when the DVD-player is switched-on, or
when the disc is inserted.
• Some discs do not allow the language to be changed
during reproduction.
• Some seconds may be necessary before the language
changes.
• Some DVDs are registered in one only language so
that when pressing AUDIO, display will show 1/1.
Change of Audio-language
VIDEO CD MULTIPLEX
The combination of the right and left audio-channels
changes each time the AUDIO-key is pressed.
During reproduction, pressing AUDIO allows to modify
the sound from mono to stereo, according to the following
scheme:
Stereo → Left → Right →
PAL/NTSC
To change from PASL to NTSC, press the P/N-key on
the remote-control unit. This will be possible only when
reproduction is stopped.
Zoom
Every time the ZOOM-key is pressed, the picture on the
screen will be enlarged.
There is a possibility that certain DVD-pictures cannot be
enlarged.
35
GB