Quality From The Very Start - Brita WD 3020 Manual De Instrucciones

II. Quality from the very start
1 Terms of warranty
The BRITA Tap system is subject to the statutory guarantee of
2 years. A guarantee claim may be asserted only if all instructions
in this handbook are followed and observed.
2 Contents of the BRITATap Water Filter Kit
To ensure you get the best result from your BRITA Tap Water Filter
Kit, please follow these instructions carefully.
Your BRITA Tap Water Filter Kit includes the following
(see fig. 1):
1. F ilter head with three settings including a convenient locking
handle
2. Flexible wall mount
3. P 1000 water filter cartridge
4. BRITA Tap (design may differ from image shown)
5. BRITA Tap Cartridge Status Indicator
6. Battery (CR2032)
7 . H ose (1) length = 800 mm, 3/8" nut on one side and M8 connec-
tor on the other side, 2 Hoses (2+3), length = 450 mm, 3/8" nut
on one side and M8 connectors on the other side
8. H ose (4), length = 800 mm and 3/8" nut on both sides
9. 2 Adapters 1/2" female thread to 3/8" male thread (Only in UK)
10. Usage Instructions
11. Carbonate hardness testing strip
12. T-piece
13. Gaskets
Recommended tools for installation: a pipe wrench, an Allen key
(4 mm), a wrench and a screwdriver.
For wall mounting the cartridge (optional), you need: two screws
(e.g. 5 mm thread diameter) and, if required, two wall plugs suitable
for your type of wall.
4
ENGLISH
1014662-002_GA_BRITA_Tap_CE.indb 4
1. 2.
4.
3.
5.
6.
7.
9.
10.
11.
12.
13.
(fig. 1)
8.
04.04.16 11:27