System Settings; Illumination Settings - Pioneer DEH-S1150UB Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

C:\Program Files (x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
PioneerTest.book Page 9 Monday, March 12, 2018 10:37 AM
Menu Item
Description
SUB.W CTRL*2*3
Cut-off frequency: [50HZ],
Only frequencies lower than those in the
[63HZ], [80HZ], [100HZ], [125HZ],
selected range are output from the subwoofer.
[160HZ], [200HZ]
Output level: [–24] to [+6]
Slope level: [–12], [–24]
BASS BOOST
[0] to [+6]
Select the bass boost level.
HPF SETTING
Cut-off frequency: [OFF], [50HZ],
Only frequencies higher than the high-pass filter
[63HZ], [80HZ], [100HZ], [125HZ],
(HPF) cutoff are output from the speakers.
[160HZ], [200HZ]
Slope level: [–12], [–24]
SLA
[+4] to [–4]
Adjust the volume level for each source except
FM.
*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 5).
*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 5).
*3 Not available when [OFF] is selected in [SUB.W].

SYSTEM settings

You can also access to these menus when the unit is turned off.
Menu Item
Description
LANGUAGE
[ENG](English), [ESP](Spanish)
Select the language to display the text
information from a compressed audio file.
CLOCK SET
Set the clock (page 4).
12H/24H
[12H], [24H]
Select the time notation.
AUX
[ON], [OFF]
Set to [ON] when using an auxiliary device
connected to the unit.
Menu Item
Description
ANDROID WIRED
[MEMORY], [APP CONTROL]
Select the appropriate connection method for an
Android device.
P.APP AUTO ON
[ON], [OFF]
Select [ON] to automatically launch Pioneer ARC
APP when an Android device is connected to the
unit via AOA. (Not available when [MEMORY] is
selected in [ANDROID WIRED].)
S.REMOTE*1*2
[OFF], [PIONEER], [PRESET]
Select [PIONEER] or [PRESET] according to your
wired remote control.
USB AUTO
[ON], [OFF]
Select [ON] to automatically switch to [USB]
source when a USB device is connected to the
unit.
Select [OFF] when a USB device is being
connected to the unit just for charging.
*1 Depending on your car, this function may not work properly. In this case, contact your dealer or an
authorized PIONEER Service Station.
*2 Please use a commercially available wiring harness for each car model when [PRESET] mode is
engaged, and use a commercially available adapter when in [PIONEER].

ILLUMINATION settings

Menu Item
Description
DIM SETTING
[SYNC CLOCK], [MANUAL]
Change the display brightness.
BRIGHTNESS
[1] to [10]
Change the display brightness.
The available setting ranges differ depending on
[DIM SETTING].
19_811CS_ME_QRD3595(A5_Horizon)
9
En
DEH-S1150UB

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido