System Settings - Pioneer MVH-X690BS Manual De Instrucciones

Menu Item
SAVE SETTINGS
[YES], [CANCEL]
LOAD SETTINGS
BASS BOOST
[0] to [+6]
LOUDNESS
[OFF], [LOW], [MID], [HI]
AUTO LV CTRL
[OFF], [MODE1], [MODE2]
SLA
[+4] to [–4]
*1 Not available when [SW] is selected in [REAR-SP] in the INITIAL settings (page 6).
*2 Not available when [FUL] is selected in [REAR-SP] in the INITIAL settings (page 6).

SYSTEM settings

You can also access to these menus when the unit is turned off.
Menu Item
CLOCK SET
12H/24H
[12H], [24H]
Description
Save to later recall the following sound settings
at their current values: [CROSSOVER], [SPEAKER
LEVEL], [EQ SETTING], [POSITION], [TIME
ALGNMNT], [BASS BOOST], [SUBWOOFER].
Load the sound settings, when you have already
performed [SAVE SETTINGS].
Select the bass boost level.
Compensate for clear sound at low volume.
Adjust the difference in volume levels among
sources or audio files automatically.
Adjust the volume level for each source except
FM.
Each of the below combinations are set to the
same setting automatically.
• When making a USB connection, set USB, iPod,
PANDORA, ANDROID, SPOTIFY, and APP.
• When making a Bluetooth connection, set BT
AUDIO, iPod, PANDORA, ANDROID, SPOTIFY,
and APP.
Description
Set the clock (page 5).
Select the time notation.
Menu Item
BEEP TONE
[ON], [OFF]
INFO DISPLAY
[SOURCE/BTINFO], [SOURCE/
SPEANA], [CLOCK/BTINFO],
[CLOCK/SPEANA], [LEVEL METER],
[SPEANA], [OFF]
DOT DISPLAY
[SPEANA], [ICON]
AUX
[ON], [OFF]
BT AUDIO
[ON], [OFF]
SPOTIFY
[ON], [OFF]
BT MEM CLEAR
[YES], [CANCEL]
PHONE CONNECT
[IPHONE/IPOD], [ANDROID]
Description
A beep can be heard when any button is pushed.
Select [OFF] to disable this function.
Display the item on the sub information display.
• When [SOURCE/SPEANA] or [CLOCK/SPEANA] is
selected, display the antenna instead of the
speana on the radio source.
Select [SPEANA] or [ICON] to appear on the left
side of the display.
Set to [ON] when using an auxiliary device
connected to the unit.
Set the Bluetooth signal on/off.
Set to [ON] when using the Spotify function.
Clear the Bluetooth device data (device list, PIN
code, call history, phone book, preset phone
numbers) stored in the unit.
[CLEARED] appears when data is successfully
deleted.
Select the type of device ([IPHONE/IPOD] or
[ANDROID]) and the appropriate connection
method ([WIRED] or [BLUETOOTH]) according to
your device.
• When [BLUETOOTH] is selected, USB
connections cannot be made regardless of the
current Bluetooth connection to the unit.
• Select [ANDROID] when you connect the
mobile device other than iPhone or Android.
• When the setting is changed, [USB AUTO]
(page 20) is automatically performed if [USB
AUTO] is set to [ON].
19
En