GB
ENGLISH
Battery Characteristics:
IBEA batteries are Lithium-ion Polymer. After 1,000 charging
cycles, IBEA batteries can be charged to 80% of initial
capacity without, however, reducing the power delivered by
the battery during work.
It is preferable to partially drain the battery rather than fully.
Advantages:
1- They are less dangerous if they are damaged because
they contain a solid component (polymer) that is not
flammable.
4. TECHNICAL DATA AND DECLARATION OF CONFORMITY
ACTIVE s.r.l. Via Delmoncello 12 - 26037 San Giovanni in Croce (CR)
declares under our sole responsibility that the batteries brand IBEA:
BATTERY (Lithium / Polymer)
WEIGHT
VOLTAGE
CAPACITY
STORED ENERGY
MINIMUM OPERATING LIFE
BATTERY CHARGE TIME
Battery life has been surveyed from actual working time without pause and with medium cut.
have been tested by us with the listed standards EN 55022:2006, EN 61000-3-2:2006, EN 61000-3-
3:1995+A1:2001+A2:2005, EN 55024:1998+A1:2001+A2:2003 and found in compliance with the council EMC directive
2004/108/EC. It is possible to use CE marking to demonstrate the compliance with this EMC directive.
BATTERY CHARGER
MAINS VOLTAGE
FREQUENCY
3. INFORMATION
B400
3,5 Kg
10 Ah
360 Wh
This may vary depending on the tool used and work to be performed.
2- They have no memory effect, so they can be charged at
any time without problems.
Disadvantages:
1- They can rapidly lose charge at low and high temperatures.
Motor Characteristics:
IBEA motors are Brushless (without brushes). Therefore, no
maintenance is required and, not having any rubbing contact,
the motor screw is theoretically infinite, with the exception of
the ball bearings.
BA TT E RI E S
B600
5 Kg
36 V
15 Ah
540 Wh
1000 CYCLES
4 h
B4 / B6
SSLCO84V42
100 - 240 V
47 - 63 Hz
26037 San Giovanni in Croce (CR) - ITALY
10
B800
6 Kg
20 Ah
720 Wh
B8
ES-3604SL
100 - 240 V
50 - 60 Hz
ALBERTO GRIFFINI
PRESIDENTE
ACTIVE S.r.l.
Via Delmoncello, 12
11/03/2014