Kolcraft Elise Instrucciones De Montaje página 7

Step 2:
A. Flip the mattress support so the "This Side Up" label is facing up. If the label is missing,
the correct orientation is with the springs at the top of the frame.
B. With a helper to hold it at the right height, align the bolts on the Mattress Support (C) with
the holes on the crib sides and tighten with the allen wrench. There are three possible height
positions. The support should start at the high position for newborns, then be moved lower
as the child grows and becomes more mobile. Once the child is able to pull up to a standing
position, the support must be set to its lowest position.
(C) Mattress Support
Label reading "This Side Up" should
be facing up
Thread and tighten
all four bolts
High Position
Middle Position
Low Position
6