Premier SX-5257BT Manual De Instrucciones página 28

VIDEO MENU SETUP
1) In video mode, press SETUP button on remote to enter the setup menu.
2) Press the Direction buttons to switch between the different setup pages.
3) Use the Direction buttons to move the cursor to the position you want, then press ENTER button
again to enter the subdirectory. Press ENTER buttons again to enter the next subdirectory.
4) Press the SETUP button again to exit the setup.
Language Setup
1) OSD language
To select one of the languages of the screen
displays and setup menus.
2) Audio
When playing video disc, the player will auto-
play the built-in language of the disc. This unit
could play languages as in the list.
3) Subtitle
When playing video disc with multiple languages,
the player will auto-play the built-in subtitle
language of the disc. This unit can play the listed
built-in languages or you may choose "off" to close the subtitle.
4) Disc menu
Choose one of the listed languages for the disc menu.
Video Setup Page
1) Video output
To select the the video output: CVBS, YPbPr.
(Make sure the player is set to the correct video
mode.)
2) TV display (4:3PS, 4:3LB, 16:9WIDE)
Choose one of the display formats suited with TV.
If the TV display is 4:3, the display format of the
video is 16:9, the image will be compressed
horizontally.
3) TV type
The player supports tv types: PAL, AUTO, NTSC.
4) Color setting
Adjust the video color output:
Sharpness: High, Medium and Low;
Brightness: +/-20, the default is 0;
Contrast: +/-16, the default is 0;
Gamma: None, Low, Medium, High;
Hue & Saturation: +/-9, default is 0;
5) TV mode (This option is not available when the video output is CVBS.)
To select one of the scan modes: progressive and interlace.
6) Panel light
To turn the panel light ON or OFF on the front panel.
LANGUAGE SETUP
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
GOTO LANGUAGE SETUP
VIDEO SETUP
VIDEO OUTPUT
TV DISPLAY
TV TYPE
COLOR SETTING
TV MODE
PANEL LIGHT
GOTO VIDEO SETUP PAGE
13
SPA
SPA
SPA
SPA
CVBS
16:9
NTSC