TROUBLE SHOOTING
For your convenience, we have listed some methods to solve common problems you may encounter
when you using the system. If the problem occurs repeatedly, contact the nearest maintenance center.
Problem
Power supply
does not work
Remote does
not work
No image on
the TVscreen
Play is unavailable
No sound from
speakers
Discontinuous sound
or distorted pictures
Invalid display on
the screen
Possible cause
Power plug is not fully inserted
into the power socket
The batteries have been used up
The remote control is not aimed
at the remote control sensor
The system is not connected
correctly
TV not set in video mode
The scanning mode does not
match to the TV scanning mode
No disc inserted
Disc incorrectly inserted
Disc is not compatible with
this device
Audio wire is not connected
correctly
Incorrectly connected to
amplifier
Disc is not clean
Disc is scratched
Disc distorted
Operation incorrect
16
Solution
Fully insert the power plug
into the power socket
Replace them with new ones
Please aim the remote control
correctly; in line with the
remote sensor
Reconnect the system by
referring to the illustration
Set the TV in video mode
Reset the scanning mode
Insert a disc
Reinsert the disc with the
picture upward
Only use disc that are
compatible with this device
Connect the audio wire
correctly
Connect the amplifier correctly
by referring to the illustration
Replace with a clean disc or
use a soft cloth to clean the disc
Replace with a new one
Please refer to the user manual