Melchioni Family PLANA Manual De Usuario página 9

"ZERO" OR "TARA" FUNCTION
To weight different loads consecutively without removing loads from scale. Put first Load on the scale, get weight
reading. Press ZERO button to reset the LCD reading to "0" before adding newt load. You can repeat this operation.
VOLUME INDICATION MODE
A. Place the scale on a solid and flat surface.
B. Gently press on the scale by hand to turn on.
C. Wait until LDC shows "0" and press MODE button
to choose "water" or "milk" mode.
D. Put a liquid container onto the scale platform.
LCD shows weight of container.
E. Press ZERO button to zero or tare weight.
F. Put liquid (water or milk) into the container,
LCD shows the volume or the liquid.
G. Press MODE button to choose "Weight" mode
and view the weight of liquid.
Condition 1: "ZERO" function
when total sum of all loads on scale ≤ 4% of scale's max. weight capacity.
4% = 80 gr when capacity is 2000gr
200 gr cwhen capacity is 5000 gr
LCD will show "----" o "0g" each time ZERO is pressed.
"----" means not stable, please wait for a moment.
"0g" and meanwhile an icon "O" on the left side of LCD mean ZERO function is activated.
Max weight capacity remains unchanged.
Condition 2: "TARA" function
when total sum of all loads on scale > 4% of scale's max. weight capacity.
4% = 80 gr when capacity is 2000 gr
200 gr when capacity is 5000 gr
LCD will show "----" o "0g" each time ZERO is pressed.
"----" means not stable, please wait for a moment.
"0g" and meanwhile an icon "T" on upper left corner of LCD mean TARE function
is activated.
Max weight capacity is reduced by total weight of all loads.
Under this contition:
By pressing ZERO, you can see the total weight of all loads on the scale.
If you want to weigh more loads, just press ZERO to reset LCD reading to "0" again.