Use, Maintenance And Precautions Of Battery - Altuna AB32 Manual De Uso

EN

USE, MAINTENANCE AND PRECAUTIONS OF BATTERY

BATTERY CHARGING
The battery of the new product is not fully charged. Place the battery on the desktop, insert
the charger output jack into the battery socket, and then plug the charger plug into the
power socket. When the indicator light lights up, charging starts. When the indicator light of
the charger is red, it indicates that the charger is charging; when it is green, the charging is
done and the battery can be used.
CHARGING STEPS
Place the battery on the desktop
1
and insert the charger plug into
the battery.
2
Plug the charger into a power
outlet;
3
When the indicator light of the
charger is red, it indicates that
the charger is charging; when it
is green, the charging is done.
Clear up, clean and pack.
The display will be reminding you when the battery capacity is less
20%. It was stopped working automatic when the battery capacity
is less 5%.
PRECAUTIONS
Each indicator light represents the charging state of one USB. This charger has three/
two USB ports. Two-port and three-port chargers are optional based on the model of the
product you purchase.
Please use the charger included for charging, on which there is an indicator light
corresponding to each charging plug (whetherfor individual charging or multiple
charging, please refer to the indicator light on the charger to determine if charging
is completed. The charger adopts a sequential charging method instead of simul-
taneous charging.)
Note: Whether the battery is connected or the power supply is not
connected, the indicator light is green.
1
2
27
ALTUNA AB32
|
3