Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Quick Operation Guide
4. USAGE INSTRUCTIONS.
4.1 - Place the lift on a firm, flat surface in the
area it is to be used supported by its transport
wheels (T).
4.2 - Remove the outriggers from their transport
supports (S) and fully insert them into their
positions (V) checking that they are fixed by
the pins (R).
4.3 - Adjust the outrigger stabilisers (Q) by
turning the cranks (H) to level the lift. Ensure it is
in a vertical position by using the spirit level
indicator (F) found on the base section. The
bubble should be in the centre of the circle.
4.4 - Place the forks in a horizontal position and
secure them with the pins.
4.5 - DO NOT OVERLOAD THE LIFT
TL-A150 MAXIMUM LOAD IS 150 KG.
The lift should NEVER be overloaded. Safety
at work is the most important element. Place
the load onto the lift using an adequate support
according to the need, use so that the weight of
the load will only elevate in a vertical direction.
4.6 - How to place the load
Always load as close to the tower as possi-
ble. The maximum load diminishes according
to the distance from the body of the tower as
illustrated in the diagram below.
PRO LIFTS S.L.
ENGLISH
Distance from the
center of the load to
the carriage
A
25 cm
B
30 cm
C
40 cm
D
50 cm
E
60 cm
v12.03 - Depósito legal y Copyright 2012. Todos los derechos reservados.
Maximum load
TL-A150
150 Kg
135 Kg
112 Kg
96 Kg
84 Kg
Publicidad
Tabla de contenido
