Unold 28915 Instrucciones De Uso página 26

DE
EN
FR
NL
IT
ES
Select the time
7. Now set the desired level on the timer. You can select between 2 and 60
PL
seconds in the following steps. At the „0/OFF" position the appliance is
switched off.
Level:
Runtime in seconds:
Start the grinding process
8. Press the ON/OFF button once.
9. The appliance starts with the grinding process.
10. As soon as the pre-selected time elapses the appliance switches off.
11. If you want to continue the grinding process, press the ON/OFF button again.
12. You can interrupt the grinding process at any time by either
ƒ pressing the „ON/OFF" button
ƒ or setting the timer to 0/OFF.
13. The maximum runtime must not exceed 3 minutes, otherwise the motor
can be damaged. Allow the appliance to cool for approximately 30 minutes,
before continuing with the grinding process.
End the grinding process
14. Take out the collection container. Now you can now use the coffee powder
as desired.
15. When you have finished grinding the coffee beans, switch the appliance off
via the ON/OFF button and unplug the appliance from the power supply.
The blades of the grinder tool are sharp – never stick your fingers, eating
utensils or other objects into the grinder tool – danger of injury!
26 von 76
Copyright UNOLD AG | www.unold.de
0/Off 2
Off 12
on the container is directly
above the lettering of the
desired degree of grinding.
4 6 8
24 36 48
10
60
Stand 19.2.2020