Instructions For Special Conditions; Use The Memory Function - Orbegozo TES 4650 Manual De Instrucciones

TES 4650
NOTE: To stop the inflation or measurement, press the "START-STOP" button in anytime. The unit will stop
inflating and then release and turn off.
INSTRUCTIONS FOR SPECIAL CONDITIONS: In order to accelerate the measurement time for the systolic
pressure more than 180 mmHg, press and hold the memory button until the unit inflates 30 to 40 mmHg
higher than your suspected systolic pressure if you know. (The unit will not inflate above 299 mmHg).

USE THE MEMORY FUNCTION

• The unit stores the blood pressure and pulse rate in the memory after completing a measurement every
time. It can automatically store 60 sets of measurement values. The oldest record is deleted to save the
latest measurement value when more than 60 sets.
• The unit also calculates an average reading based on the values of the latest 3 times measurement taken
1. To read the average value
Press the "MEM" button. The average value symbol will display.
2. To read the measurement value
Press the "MEM" button to view the latest measurement value with the measuring date and time.
Press the "SET" button to view the oldest measurement value with the measuring date and time.
3. To delete the memory value
In the memory reading mode, press the "MEM" button for 4-6 seconds the unit will display à
Press the "MEM" button again and LCD will display à
If you are sure all the data of corresponding user can be deleted, press the "START-STOP" button. All the
corresponding user's data will be deleted and the unit will turn off.
31